![]() ![]() To change port values, locate system.properties in the following directory:.WARNING:Changing the is currently not supported, as there is no option within the Camera Web Interface to define a custom port. When Accessing the NVR from a Remote LAN: From client to NVR: Ports used between the client and NVR when attempting to view streams and/or recordings from a separate subnet or over the internet.From NVR to camera: Ports used will need to be made available if the camera is on another subnet, or separated by the internet. ![]() Please note that when Purpose states "NVR Side", the port must be made available externally to the NVR and when it states "Camera Side", the port must be made available externally to the camera. From camera to NVR: Ports used if cameras and Network Video Recorder (NVR) are on a different subnet or separated by the internet.Keep in mind the following about the Direction column in the tables below: If the NVR will be accessed by cloud, it is necessary to allow the NVR to communicate outbound on any UDP port to establish WebRTC connections. This article only enables access directly by the NVR's IP address, or a domain name if one has been configured. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |